Dhcp ip-addresses on remote site are from subnet on central site ???

[Jaap Laaij]

Hi all,

As stated I have a problem with dhcp.

central site:

- dhcp server with scopes for subnets '2' and '3' (at remote site)

WAN - BGP

remote site:

router
- connected route for vlan 1 (ip-address) towards switch
- static routes for subnets 2 and 3 to switch vlan 1 ip address
- routes inserted in BGP

switch
- configured vlan 1 (connected to router) vlan 2 and 3, with ip address in respective subnets/vlan.
- ip routing enabled
- static route for "unknown" subnets to routers ip-address on vlan 1
- vlan 2 and 3 have ip-helper addresses to dhcp server on central site

Connectivity from the switch on remote site towards central site,any active ip-address, is OK!

However on the remote site, ip-addresses obtained through dhcp are ip-addresses from a subnet on the Central site !?!?!
This for both vlan 2 or 3.

Anyone an idea?
Configuration items missing?

Thanx Jaap

[Jaap Laaij]

Addition:

At first we had the following config that worked fine with obtaining dhcp ip-address in right subnet:

on remote switch:
- ip routing
- static route to router

vlan 1 (subnet shared with the router)
- untagged ports for pc/tc's
- ip helper address

vlan '2'
- tagged ports for Voip phones

PCs/TCs connected to VoIP-phones (same in new situation).

[Jaap Laaij]

Hi,

The command:
dhcp-relay option 82 append ip
should solve this problem probably.
I'm not sure if the dhcp server (W2003), ic the dhcp-scope of that perticular subnet, will need to have this option configured as wel ?

Anyone?

TIA