Gui problems with a Stack Member

[GUI Interface problems]

I have 2 HP 3400cl switches stacked. One configured as the commander and the other as a member. When I use the web interface to manage the switches through the commander I can see that the member has attached successfully and the configuration appears to be ok, but when I select the member switch from the drop down box nothing gets displayed in the GUI. Can anyone help me?

[Matt Hobbs]

When you connect to the web interface, make sure you login with the Manager username/password.

Easiest way is to set both an Operator and Manager password.

I believe this problem can occur if you login as Operator, or Operator has no password.

[GUI Interface problems]

You're a star!!! I didn't have a password set-up for the Operator. I've just given it one and it works fine. Thanks Again!

[GUI Interface problems]

You need to setup the operator password in addition to the manager password for the gui to work properly