HPE Community
Switches, Hubs, and Modems
1825761 Members
2218 Online
109687 Solutions
New Discussion

procurve 2810 fan not working.

 
SOLVED
Go to solution
SteveRichter8
Occasional Advisor

‎06-09-2010 08:18 AM

‎06-09-2010 08:18 AM

procurve 2810 fan not working.

Can I replace the fan in a procurve 2810 with a stock fan?

one of the fans on my procurve 2810 is not working. The switch is working but the amber fault light is blinking.

thanks,
0 Kudos
3 REPLIES 3
Mohammed Faiz
Honored Contributor

‎06-09-2010 08:30 AM

‎06-09-2010 08:30 AM

Solution

Re: procurve 2810 fan not working.

Procurve switches are covered by a lifetime warranty so just contact HP and they'll send a replacement after which you send the faulty switch back to them.
SteveRichter8
Occasional Advisor

‎06-09-2010 08:50 AM

‎06-09-2010 08:50 AM

Re: procurve 2810 fan not working.

they look to be standard 40mm fans. The broken one I pulled from the switch is model TA150DC. Plenty of them on ebay.

thanks,
0 Kudos
Chris Sidwell-Smith
Advisor

‎06-10-2010 12:57 AM

‎06-10-2010 12:57 AM

Re: procurve 2810 fan not working.

Steve,

Seriously send it back to HP. I sent one back because the fan was too noisy and it was disturbing the office it was located in (fan blades were rubbing against the case). Lifetime warrentee means you don't have to fiddle around on ebay finding parts.

Chris
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.