HPE Community
Switches, Hubs, and Modems
1825581 Members
1683 Online
109682 Solutions
New Discussion

Re: Procurve Manager B0221 causes HP Procurve 5406zl to reset

 
Harm Tilburgs
Advisor

‎09-18-2007 09:15 PM

‎09-18-2007 09:15 PM

Procurve Manager B0221 causes HP Procurve 5406zl to reset

After installing the HP Procurve Manager B0221, our HP Procurve Switch 5406zl starts resetting 'blocks'.

We have 4 blocks of 24 ports in the 5406zl switch and 1 block at a time is being reset every 1 minute.

Stopping the Procurve Services solves the problem.
Anybody an idea how this comes and how to solve?
0 Kudos
1 REPLY 1
Mohieddin Kharnoub
Honored Contributor

‎09-19-2007 07:12 AM

‎09-19-2007 07:12 AM

Re: Procurve Manager B0221 causes HP Procurve 5406zl to reset

Hi

Sounds like you have sFlow or traffic monitoring on on that switch.

Try to disable that if its on for troubleshooting purpose, and see whats going on after that.

Good Luck !!!
Science for Everyone
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.