HPE Community
Switches, Hubs, and Modems
1847882 Members
4936 Online
104021 Solutions
New Discussion

S0,C0: HW ASIC Chip error type = 0x20

 
Omer Ugur CANKUT
Occasional Contributor

‎03-05-2009 06:44 AM

‎03-05-2009 06:44 AM

S0,C0: HW ASIC Chip error type = 0x20

HP A7984A 4/8 SAN Switch, error is given as above. What could be the problem

Thnx.
0 Kudos
1 REPLY 1
dufferking
Visitor

‎09-06-2010 12:50 AM

‎09-06-2010 12:50 AM

Re: S0,C0: HW ASIC Chip error type = 0x20

Hello ,

This error stay at indicate a defective Hardware.

Whenever this error occurs,


1) restart the system at the next maintenance window.

2) If the problem persists, replace the blade.


In this case you need to replace the switch.

regards
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.