Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

SNTP or TIMEp on HPPC 2510-24

 
SOLVED
Go to solution
Highlighted
New Member

SNTP or TIMEp on HPPC 2510-24

First of all:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ip default-gateway 10.10.10.1
sntp server 132.236.56.250
timesync sntp
sntp broadcast
sntp 300

Connection scheme:

HPPC 2410-24 -> Cisco SB-107[10.10.10.1] -> internet

As you can see i've configured the time server parameters. But after reboot switch does not obtain correct time from the time server.

Cant somebody tell me how to fix it? And where is the mistake if it is?
2 REPLIES 2
Highlighted
Frequent Advisor
Solution

Re: SNTP or TIMEp on HPPC 2510-24

I believe you need to set change the setting from sntp broadcast to "sntp unicast" since you have identified a specific sntp server.

Highlighted
New Member

Re: SNTP or TIMEp on HPPC 2510-24

Thanks Jack. I've allready figured out.