VLAN Voice on HP Procurve 4104

[pierpaolo_1]

Hi,
I have a HP procurve 4104, i would like to connect the switch with 3 cisco 7911 phone and a call manager and to let them work. The cisco 7911 phone are connect in the port 1,2,3 of the switch and every phone is connected with a PC. The call manager is connceted in the port 4 of the switch. I have configure the HP procurve in this way:


VLAN DEFAULT
untagged 1-4

VLAN 10
name VLAN Voce
tagged 1-4

But it doesn't work?
It this configuration correct?
The DHCP service for the cisco phone is in call manager, is it correct?

thank very much
Pierpaolo

[cenk sasmaztin]

hi
please send me sh run print

I make new config for you

cenk

[pierpaolo_1]

The configuration is easy. it is the default configuration where all the ports belong to vlan 1, the default vlan, in untagged way.

thanks

[EckerA]

Hi,
to which vlan does the call manager belong? Does the callmanager do tagging or is it in the default vlan?
and a sh run always helps us help you!
alex

[cenk sasmaztin]

port 1-2-3 connect pc and ipphone must be vlan 1 untag vlan 10 tag port

call manager must be connect vlan 10 untag port

dhcp server connect vlan 1 untag port and you create two scobe for vlan1 and vlan 10

and ip routing enable on switch
you can write ip helper command in vlan 10

cenk

[cenk sasmaztin]

you make enable
1-vlan enable ,vlan id 10 on ipphone and QoS priority 6
2-you make in switch vlan 10 QoS priority 6