Switching and Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE 1920s with Cisco WAP 581

 
Highlighted
Occasional Collector

HPE 1920s with Cisco WAP 581

I've got switch HPE 1920s and Cisco WAP 581. I've set up local network on VLAN 100 and Guest Network with VLAN 200. On the HPE Switch when i set VLAN 200 include and tagging guest network work.(Ports 1-5) When i'm setting vlan 200 to the port where Access Points are connected too (Link Aggregation) i don't have access to internet.(Ports 25-29) Do someone how to resolve that issue?

1 REPLY 1
Highlighted
Honored Contributor

Re: HPE 1920s with Cisco WAP 581

Hi!


@Vicebal wrote: When i'm setting vlan 200 to the port where Access Points are connected too (Link Aggregation) i don't have access to internet.(Ports 25-29)

I believe Links Aggregation (IEEE 802.3ad) can't (and should not) be used against the two Ethernet ports of your Cisco WAP581 Access Point: indeed one port works at 2.5 Gbps and the other works at 10/100/1000 Mbps. I don't see the way you could/should/would use any Link Aggregation feature involving those two ports (I mean the rule is either to use the 2.5 Gbps port or to use the standard 10/100/1000 Mbps port...not to aggregate them together).