MSR20-10 not booting

[Marinhogd]

Hi Guys,

Does someone know if its possible recovery from this? The router is not booting. Maybe boot from USB device?

****************************************************************************
* *
* HP A-MSR20-10 BootWare, Version 5.00 *
* *
****************************************************************************
Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.

Compiled Date : Sep 11 2014
CPU Type : MPC8323E
CPU L1 Cache : 16KB
CPU Clock Speed : 333MHz
Memory Type : DDR SDRAM
Memory Size : 256MB
Memory Speed : 266MHz
BootWare Size : 1024KB
CPLD Version : 1.0
PCB Version : 3.0


BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/main.bin!.................
............................................................................
............................................................................
........................................
The main application file is invalid!
Starting to get the backup application file--flash:/backup.bin!
The backup application file does not exist--flash:/backup.bin!
Starting to get the secure application file--flash:/secure.bin!
The secure application file does not exist--flash:/secure.bin!
Booting App fails!
Application program does not exist.
Please set network parameters to download the app file;
The application will automatically load and run.
Protocol (FTP or TFTP) :tftp
Load File Name :main.bin
:

[-Alex- · Accepted solution]

Hello Marinhogd,

You may try the procedure on page 92 to load the firmware:

https://support.hpe.com/hpesc/public/docDisplay?docId=c05335191

Hope this helps!

[Marinhogd]

Yeah, Thank you. This process was simple and worked fine.