About sharathkv25

sharathkv25 · ‎09-24-2008

Hi, Is there a document guide for upgrading from PA RISC v1 to PA RISC v2? Thanks

sharathkv25 · ‎07-24-2008

No, I don't have OnlineJFS installed.

sharathkv25 · ‎07-24-2008

Hello, I would like to extend the /tmp partition on B.11.23 ia64 Itanium server. I am not able to do so. This is the log: # uname -a HP-UX webux100 B.11.23 U ia64 3634399568 unlimited-user license # hpux -is sh: hpux: not found. # init s # INIT: New run level: S INIT: SINGLE USER MODE ttytype: couldn't open /dev/tty for reading (c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2003 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2). You have mail. Cannot open /dev/tty read/write to ask. Quitting. Value of TERM has been set to "". WARNING: YOU ARE SUPERUSER !! # mount / on /dev/vg00/lvol3 ioerror=nodisable,log,dev=40000003 on Thu Jul 24 09:07:06 2008 /stand on /dev/vg00/lvol1 ioerror=mwdisable,log,nodatainlog,tranflush,dev=40000001 on Thu Jul 24 09:07:07 2 008 /var on /dev/vg00/lvol8 ioerror=mwdisable,delaylog,nodatainlog,dev=40000008 on Thu Jul 24 09:07:21 2008 /usr on /dev/vg00/lvol7 ioerror=mwdisable,delaylog,nodatainlog,dev=40000007 on Thu Jul 24 09:07:21 2008 /tmp on /dev/vg00/lvol4 ioerror=mwdisable,delaylog,nodatainlog,dev=40000004 on Thu Jul 24 09:07:21 2008 /opt on /dev/vg00/lvol6 ioerror=mwdisable,delaylog,nodatainlog,dev=40000006 on Thu Jul 24 09:07:21 2008 /home on /dev/vg00/lvol5 ioerror=mwdisable,delaylog,nodatainlog,dev=40000005 on Thu Jul 24 09:07:21 2008 # # umount /dev/vg00/lvol4 umount: cannot unmount /tmp : Device busy umount: return error 1. #

sharathkv25 · ‎12-03-2007

Hi, I want to install JDK1.3 on the following system configuration: $ uname -a HP-UX test3 B.11.11 U 9000/785 2013846943 unlimited-user license Any links please? Thanks

sharathkv25 · ‎10-03-2007

Hi, J. Bravo solution worked fine. Thanks to all those who replied.

sharathkv25 · ‎10-03-2007

Hi J, Bravo Your command worked! I am trying to ftp an 2.5 GB zip file to /opt/tmp on HPUX Hope your command works and does not again give me a Netout: connection reset by peer error. Thanks

sharathkv25 · ‎10-03-2007

Hi, I want to increase the /opt partition to hold files greater than 2GB. I get this error with fsadm # fsadm -F vxfs -o largefiles /dev/vg00/lvol6 vxfs fsadm: /dev/vg00/lvol6 is not the root inode of a vxfs file sytem # # fsadm -o largefiles /dev/vg00/lvol6 vxfs fsadm: /dev/vg00/lvol6 is not the root inode of a vxfs file sytem #

sharathkv25 · ‎09-30-2007

# uname -a HP-UX test3 B.11.11 U 9000/785 2013846943 unlimited-user license # swlist | grep Samba Samba 3.0.23a Samba Server script to start Samba #!/bin/ksh mode=$1 case $mode in 'start_msg') echo "Start Samba Server" ;; 'stop_msg') echo "Stop Samba Server" ;; 'start') /usr/local/samba/bin/smbd -D /usr/local/samba/bin/nmbd -D ;; 'stop') kill `cat /var/opt/samba/locks/smbd.pid` kill `cat /var/opt/samba/locks/nmbd.pid` rm -f /var/opt/samba/locks/smbd.pid rm -f /var/opt/samba/locks/nmbd.pid ;; *) echo "Usage $0 { start | stop }" esac exit 0 # ./samba.ks start /usr/lib/dld.sl: Can't find path for shared library: libiconv.sl /usr/lib/dld.sl: No such file or directory ./samba.ks[13]: 27317 Abort(coredump) /usr/lib/dld.sl: Can't find path for shared library: liblber.sl.2 /usr/lib/dld.sl: No such file or directory ./samba.ks[14]: 27318 Abort(coredump) any idea how to solve this? Thanks

sharathkv25 · ‎09-24-2007

Hi, I need to install Samba Server on HPUX rp3460 v1 server(11.11). Where can I download Samba for HPUX? Thanks

sharathkv25 · ‎09-13-2007

I am trying to create a tape from sv_build_tape. I get this error. v3 (pacman) $ sv_build_tape -v 4.0 -l Accessing PSF file=>/var/spool/sw/psf/OSMFMV_4.0.psf File consistency is OK for PSF File consistency is OK for /opt/build_depot_osmfmv_4.0 Ready to build SD Depot for SV-UX 4.0 Depot will be installed at /var/spool/sw/smartview Building SD Depot for SV-UX 4.0 ======= 09/13/07 17:33:55 PDT BEGIN swpackage SESSION * Session started for user "root@xxxx.xxxx.com". * Source: tpdev3:/var/spool/sw/psf/OSMFMV_4.0.psf * Target: tpdev3:/var/spool/sw/TP40 * Software selections: * * Beginning Selection Phase. * Reading the Product Specification File (PSF) "/var/spool/sw/psf/OSMFMV_4.0.psf". NOTE: Creating new target depot "/var/spool/sw/TP40". * Selection Phase succeeded. * Beginning Analysis Phase. * Analysis Phase succeeded. * Beginning Package Phase. ERROR: Internal error. No software has been selected from the specified source; there is nothing to package. This error occurred in function "PKG_PackageSourceIntoTarget", source file "build.c", line 613. Please give this information to your Hewlett-Packard support contact. ======= 09/13/07 17:33:56 PDT END swpackage SESSION Any help? Thanks

sharathkv25 · ‎08-13-2007

Hi, Does anyone have a URL from where the aCC compiler for Itanium rx2620 server can be downloaded from?. Thanks

sharathkv25 · ‎08-12-2007

Hi,, I am not able to identify which is the DVD-ROM driver file. # ioscan -fun -C disk Class I H/W Path Driver S/W State H/W Type Description ============================================================================ disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N /dev/dsk/c0t0d0 /dev/rdsk/c0t0d0 disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC /dev/dsk/c2t0d0 /dev/dsk/c2t0d0s3 /dev/rdsk/c2t0d0s2 /dev/dsk/c2t0d0s1 /dev/rdsk/c2t0d0 /dev/rdsk/c2t0d0s3 /dev/dsk/c2t0d0s2 /dev/rdsk/c2t0d0s1 # Any help Thanks

sharathkv25 · ‎08-06-2007

Hi, Sorry to bring this up again. This server has no Management Port(i,e: rx2620 ). It has 2 serial ports. I am trying to get the Console Menu through Hyperterminal. I am not getting any response from server?. What else should I check? Thanks

sharathkv25 · ‎08-01-2007

Hi, A small correction, the server is HPUX rx2620 Thanks

sharathkv25 · ‎08-01-2007

Thanks HP Server rx2600 This has no "Console/Remote/UPS"(25-pin socket) at the rear of the server. It has only 2 Serial Ports available. Thanks

sharathkv25 · ‎08-01-2007

Hi, I connected Serial Port of Itanium server to Serial Port of Laptop. I powerred on the server. I opened Hyperterminal & created a new connection with following settings: Port = COM1 bits per second = 9600 Flow control = none Data Bits = 8 ( default ) Parity = None ( default ) Stop bits = 1 ( default ) I am not able to get Console Menu screen. Any idea how to solve this?

sharathkv25 · ‎07-01-2007

Hi, I am trying to install Oracle software. The Oracle installer checkes for a couple of system pre-requisites that must be available before software can be installed. One of the pre-requisites is that display must at least be 256 colors. I got this message during OS requirements check from Oracle installer. checking monitor: must be configured to display at least 256 colors >>>>>>>>FAILED Q) How to check & enable 256 color display? Thanks

sharathkv25 · ‎06-28-2007

The volume to which I am copying on the HPUX server has lots of space. I have used only about 19% after transferred the mentioned bytes of the zip file. /dev/vg00/lvol6 20480000 3735354 15698147 19% /opt Filling up the volume is not an issue, I guess. Thanks

sharathkv25 · ‎06-28-2007

Hi, I am trying to transfer a 2.55GB zip file from Windows XP Professional to a HPUX server. After 2147483647 bytes of the zip file are transferred to the HPUX server, I am getting this message: > Netout :Connection reset by peer 452 Error writing file: Error 0. ftp: 2147516415 bytes sent in 228.21Seconds 9410.18Kbytes/sec. I am using windows built in ftp from command line. There is no VPN or any other software used for file transfer. Just a normal ftp from windows command line to HPUX box. Any ideas? Thanks

sharathkv25 · ‎06-25-2007

Thanks, This is all I get with more. Cannot determine if it's FOE or MTOE. #swlist | more # Bundle(s): # 100BaseT-01 B.11.11.01 HP-PB 100BaseT;Supptd HW=A3495A;SW=J2759BA B6848BA 1.4.gm.46.7 Ximian GNOME 1.4 GTK+ Libraries for HP-UX B8111AA 1.2.2.15.00 Java 2 RTE for HP-UX (700/800), PA1.1 + PA2.0 Add On B8465BA A.01.05.08 HP WBEM Services for HP-UX B9073BA B.06.02 HP-UX iCOD (Instant Capacity on Demand) B9098AA 1.2.2.15.00 Java 2 Plugin for HP-UX (700/800) B9788AA 1.3.1.13.01 Java2 1.3 SDK for HP-UX B9789AA 1.3.1.13.01 Java2 1.3 RTE for HP-UX BUNDLE11i B.11.11.0306.1 Required Patch Bundle for HP-UX 11i, June 2003 Base-VXVM B.03.50.5 Base VERITAS Volume Manager Bundle 3.5 for HP-UX CDE-ChineseS B.11.11 Simplified Chinese CDE Environment CDE-ChineseT B.11.11 Traditional Chinese CDE Environment CDE-English B.11.11 English CDE Environment CDE-French B.11.11 French CDE Environment CDE-German B.11.11 German CDE Environment CDE-Italian B.11.11 Italian CDE Environment CDE-Japanese B.11.11 Japanese CDE Environment CDE-Korean B.11.11 Korean CDE Environment CDE-Spanish B.11.11 Spanish CDE Environment CDE-Swedish B.11.11 Swedish CDE Environment FDDI-00 B.11.11.02 PCI FDDI;Supptd HW=A3739A/A3739B;SW=J3626AA FEATURE11-11 B.11.11.0209.5 Feature Enablement Patches for HP-UX 11i, Sept 2002 FibrChanl-00 B.11.11.09 PCI/HSC FibreChannel;Supptd HW=A6684A,A6685A,A5158A,A6795A FibrChanl-01 B.11.11.03 PCI-X FibreChannel;Supptd HW=A6826A,A9782A,A9784A GigEther-00 B.11.11.19 PCI/HSC GigEther;Supptd HW=A4926A/A4929A/A4924A/A4925A;SW=J1642AA GigEther-01 B.11.11.15 PCI/PCI-X GigEther;Supptd HW=A6794A/A6825A/A6847A/A9782A/A9784A/A7109A HPUXBase64 B.11.11 HP-UX 64-bit Base OS HPUXBaseAux B.11.11.0406 HP-UX Base OS Auxiliary HWEnable11i B.11.11.0406.4 Hardware Enablement Patches for HP-UX 11i v1, June 2004 IEther-00 B.11.11.05 PCI/PCI-X IEther;Supptd HW=A7011A/A7012A/AB352A MOZILLA 1.4.0.01.04 Mozilla 1.4 for HP-UX MOZILLAsrc 1.4.0.01.04 Mozilla 1.4 Source distribution OnlineDiag B.11.11.14.15 HPUX 11.11 Support Tools Bundle, Jun 2004 OpenSSL A.00.09.07-d.002 Secure Network Communications Protocol RAID-00 B.11.11.01 PCI RAID; Supptd HW=A5856A T1455AA 1.3.1.13.01 Java2 1.3 Netscape Plugin for HP-UX T1456AA 1.4.2.02.01 Java2 1.4 SDK for HP-UX T1456AAaddon 1.4.2.02.01 Java2 1.4 SDK -AA addon for HP-UX T1457AA 1.4.2.02.01 Java2 1.4 RTE for HP-UX T1457AAaddon 1.4.2.02.01 Java2 1.4 RTE -AA addon for HP-UX T1458AA 1.4.2.02.01 Java2 1.4 Netscape Plugin for HP-UX hpuxwsApache A.2.0.49.00 HP-UX Apache-based Web Server hpuxwsTomcat A.4.1.29.02 HP-UX Tomcat-based Servlet Engine hpuxwsWebmin A.1.070.00 HP-UX Webmin-based Admin hpuxwsXml A.2.00 HP-UX XML Web Server Tools scsiU320-00 B.11.11.01 PCI SCSI U320; Supptd HW=A7173A #

sharathkv25 · ‎06-24-2007

Hi I installed FOE on MTOE. When I run #swlist | grep -i oe I get no output. Before I installed FOE, I used to get the MTOE output. Now after I installed FOE on MTOE, there is no output. So is the OS FOE or MTOE? Thanks

sharathkv25 · ‎06-24-2007

Thanks, We're trying to migrate the OS from MTOE to FOE. At present we have the following OS on the server. # swlist | grep -i oe HPUX11i-MTOE B.11.11.0309 HP-UX Minimal Technical OE Component # # uname -a HP-UX test3 B.11.11 U 9000/785 2013846943 unlimited-user license # We want to migrate it to 11i V1 FOE When I try to boot from the CD-ROM containing the V1 FOE operating system, I get the error mentioned above. Thanks

sharathkv25 · ‎06-24-2007

Hi, I tried to boot from a HPUX v1 FOE cd from MTOE OS. I got the following error: ENTRY_IO failed, status = -4: Unrecoverable hardware error Any solutions? Thanks

sharathkv25 · ‎06-24-2007

Hi, Right now our server OS is "HPUX11i-MTOE B.11.11.0309 HP-UX Minimal Technical OE Component". We want to convert it to "HPUX 11i V1 FOE". Is this a straight forward conversion? Thanks

sharathkv25 · ‎06-07-2007

Hi, The issue is not fixed. --------------------------------------------- $ export DISPLAY=`hostname`:0.0 $ $ xclock & [1] 11821 $ Error: Can't open display: dev1:0.0 [1] + Done(1) xclock & ---------------------------------------------- I followed the steps suggetsed by Bill Hassel, yet I not able to bring up the GUI. This is quite important since a lot of our scripts use hostname in DISPLAY & they would be broken due to this small issue. Thanks

Document guide to upgrade from PA RISC v1 to PA RI...

Re: Extending /tmp partition on 11.23 ia64 Itanium...

Extending /tmp partition on 11.23 ia64 Itanium ser...

Where to download JDK1.3 for HPUX

Re: fsadm error

Re: fsadm error

fsadm error

samba errors

Download Samba

packaging problem - sv_build_tape

Dowload link for aCC compiler - Itanium rx2620 ser...

DVD ROM device file?

Re: Cannot get Console Menu - Itanium Server

Re: Cannot get Console Menu - Itanium Server

Re: Cannot get Console Menu - Itanium Server

Cannot get Console Menu - Itanium Server

How to check and display 256 colors?

Re: > Netout :Connection reset by peer

> Netout :Connection reset by peer

Re: FOE or MTOE?

FOE or MTOE?

Re: ENTRY_IO failed, status = -4 : Unrecoverable h...

ENTRY_IO failed, status = -4 : Unrecoverable hardw...

Convert MTOE to FOE

Re: can't set DISPLAY with hostname