WAN Routing
1748210 Members
2964 Online
108759 Solutions
New Discussion

Re: Core cant Ping Router

 
verzah manne
Occasional Advisor

Core cant Ping Router

Hello everyone,

 

I am newbie here...

I need a help about something that may related with STP. I found this on my router(3com ):-

 

hwping-agent enable
hwping imclinktopologypleaseignore ping
test-type icmp
destination-ip x.x.x.x (ip router)
frequency 270
send-trap probefailure 

 

router still can ping Core but Core cant ping Router. internal LAN also cant ping router. I remove that command above, but still facing the same issue. Router still can be telnet from Internal LAN or via HP IMC...No changes on configuration both router (except that command above suddenly appear) or Core. Just addition on Core for  Distribution Switch Migration that not related with connection to Router.

 

Help Me....  ; )

 

 

2 REPLIES 2
ISoliman
Super Advisor

Re: Core cant Ping Router

How they are connected ? what are the subnets ??

The above are not related to STP nor to the routing, it is just a ping test to track the interface and generate an SNMP trap if the link goes down (i guess),
verzah manne
Occasional Advisor

Re: Core cant Ping Router

Thanks for review,

 

Act i am a bit (may be a lot) blur about ur quest..

how are they connected?  Config on CORE is on vlan 40 and port g6/1/21 access 40 (down) but no directly physically connected. Through switch.

Since it's nothing to do with STP, why NMS Server cant ping the router ? even Core cant ping that router ip.

What is the the function of huawieping (hwping) command?

What is command hwping imclinktopologypleaseignore ping purpose ?