IP Count in HP MSR2003

[shaffiyulla]

Hi, 

I have configured a site with HP MSR2003 for 30MB circuit, I'm unable to configure IP count in that router. Anyone Please help me to configure the same. And I am expecting some widget in GUI module

slot 0
DEVICE_NAME : MSR2003 JG411A

MANUFACTURING_DATE : 2016-06-26
VENDOR_NAME : HPE
PRODUCT NUMBER : JG411A

HPE Comware Software, Version 7.1.059, Release 0306P11 

[shinepothen]

Hi

IP Count IP count implements accounting on the incoming and outgoing packets as well as
the packets denied by the firewall on the routers. When implementing IP count,
whether the packets match the count list rules and whether the packets are
denied by the firewall, are two standards by which the router sorts the
bidirectional packets for count. When making data statistics, both the number of
packets and the total bytes are recorded.

By default IP Count feature is turned off. I am not sure whether you will be able to do it from GUII

[shinepothen]

Using this below Url you can configure Ip count from CLI mode.

refer page 366

http://www.kiv.zcu.cz/~ledvina/Cviceni-PSI-2007/3com_configuration_guide.pdf