No VLAN Internet Access (CrossPost)

[voidmain26]

I have also posted this in the ProCurve switching discussion forum.  Since it has two pieces of equipment I figured I'd post in both places hoping for an answer.  Thanks!

Hi all,  I'm fairly desparate at this point and could really use some help.  I have a ProCurve 2920 and a new MSR 2003 router and am trying a fairly simple setup without any luck.

The router has two interfaces (1 - WAN, 2 - 10.51.10.1).  The switch has 24 ports, but I'm currently only using two of them.  Port 1 has VLAN 1001 associated with it.  VLAN 1001 is an untagged VLAN with an IP address of 10.51.50.1.  The default VLAN has an ID of 1 and an IP address of 10.51.10.2.  I am connecting port 2 of the router and port 48 of the switch.  I also have a static route in the router that points 10.51.50.0/24 to 10.51.10.2.

I have a laptop plugged into port 1 of the switch for testing purposes.  It has an IP address of 10.51.50.21.  From this laptop, with the gateway set to 10.51.50.1, I can ping 10.51.50.1, 10.51.10.2, and 10.51.10.1.  From the router console I can ping 10.51.50.21.  This tells me that VLANs are routing, and that the routing is correct between the two networks and network devices.  The problems begins when I try to ping 8.8.8.8 from the laptop.  I get a destination unreachable error.  From the router I can ping 8.8.8.8 successfully.  I can also move the laptop to port 2, change the IP address to 10.51.10.21, the gateway to 10.51.10.1 and reach the Internet (8.8.8.8) just fine.  I'm attaching the configs for both devices.  Thanks!

====================================================================================
=================================ROUTER START=====================================
====================================================================================

#
version 7.1.042, Release 0007P02
#
sysname HP
#
telnet server enable
#
dhcp enable
dhcp server always-broadcast
#
system-working-mode 
password-recovery enable
#
vlan 1
#
dhcp server ip-pool public
network 10.51.10.0 mask 255.255.255.0
address range 10.51.10.50 10.51.10.254
dns-list 8.8.8.8 8.8.4.4
gateway-list 10.51.10.1
#
controller Cellular0/0
#
interface Aux0
#
interface NULL0
#
interface GigabitEthernet0/0
port link-mode route
ip address dhcp-alloc
nat outbound
#
interface GigabitEthernet0/1
port link-mode route
ip address 10.51.10.1 255.255.255.0
#
scheduler logfile size 16
#
line class aux
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
ip route-static 10.51.50.0 24 10.51.10.2
#
ssh server enable
#
domain system
#
aaa session-limit ftp 16
aaa session-limit telnet 16
aaa session-limit http 16
aaa session-limit ssh 16
aaa session-limit https 16
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
return

====================================================================================
=================================ROUTER END=====================================
====================================================================================

====================================================================================
=================================SWITCH START=====================================
====================================================================================

; J9728A Configuration Editor; Created on release #WB.15.11.0003
; Ver #03:12.15.0d:09

hostname "EN1 Core Switch"
module 1 type j9728a
ip default-gateway 10.51.10.1
ip routing
snmp-server community "public" unrestricted
oobm
  ip address dhcp-bootp
  exit
vlan 1
  name "DEFAULT_VLAN"
  no untagged 1
  untagged 2-48,A1-A2,B1-B2
  ip address 10.51.10.2 255.255.255.0
  exit
vlan 1001
  name "Engineering"
  untagged 1
  ip address 10.51.50.1 255.255.255.0
  exit

====================================================================================
=================================SWITCH END=====================================
====================================================================================