1920 Jumbo Frames

[ifarmery]

How can I enable Jumbo Frames for a Port/VLAN on a 1920 switch.

[Vince-Whirlwind]

1. I would assume Jumbo frames are on by default on these "semi-intelligent" switches.

2. If you have anything that will actually benefit from using jumbo frames, you would probably have much more advanced switches.

[Mitchel4658]

This is not true and the MTU is defaulted to 1500.  Can someone please explain, in as much detail as possible, how to enable jumboframes on this switch?

[16again]

Seems like global CLI config command is present (use at own risk):

try telnet, login,

_cmdline-mode on
y
Jinhua1920unauthorized
system-view

[HP1920G]undo jumboframe enable

[HP1920G]display interface gi1/0/24 | include Maximum
 The Maximum Frame Length is 1522
[HP1920G]jumboframe enable
[HP1920G]display interface gi1/0/24 | include Maximum
 The Maximum Frame Length is 9600

Note: jumbo mode is on by default

Note: some switches require reboot after changing jumbo frame setting