How to create VLAN in v1910-48g

[PasqualeM]

Hi, somebody could help me to configure a VLAN on v1910-48g?

Below the configuration:
ID 1 192.168.2.x/24
ID 2 192.168.3.x/24
ID 3 192.168.4.x/24

Both VLAN are separated, no tagged ports

The vlan 1 is the first block from port 1 to port 16 with fiber in port 49 (untagged)
vlan 2 from port 17 to port 32 (untagged) with fiber in 50 and the latest ports is the 3 (untagged) with fiber in 53.

I have tried to configure VLANs but only the 2 and 3 working properly, the 1 don't "see" the main network, I can't ping the server and hosts on the main switch (also configured with VLAN and ID 1 to office network) but I can reach only the hosts connected on the v1910 switch. Where I'm wrong?

Thank you

P.S. This thread has been moevd from ProCurve / ProVision-Based to Web and Unmanaged. - Hp forum Moderator

[MatiasBire]

BUEN DIA NECESITARIAS UN ROUTER QUE MANEJE VLAN PARA RUTEAR LAS IP, A MI ME PASO LO MISMO