hp 1810 vlans

[owen keefer]

Greetings;

I want to create 3 simple vlans on an 1810G 8 port switch. Port 8 goes directly to router.
Attached file sums up the one trunk & 2 vlans.
Vlan 1 works. Vlan 34 does not work at all.

One trunk on port 8.
Two vlans: 1 & 34

Vlan 1: port 1 Untagged, port 2 untagged,
port 7 untagged, port 8 tagged

Vlan 34: port 3 untagged, port 4 untagged,
port 8 tagged

Is the setup correct?

Thanks...

P.S. this thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged - Hp forum moderator

[Michael_Breuer · Accepted solution]

Hi Owen,

basically this setup should be ok. Make sure that the router is also tagging both VLANs. Some router will not tag the native VLAN. This would cause a mismatch.

Cheers,

Michael