HP 1910-8g jg348a Switch Application program does not exist.

[Asif119]

Please help me , how can i start application

********************************************************************************
* *
* HP 1910-8G Switch BOOTROM, Version 163 *
* *
********************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.

Creation Date : May 8 2013
CPU L1 Cache : 32KB
CPU Clock Speed : 333MHz
Memory Size : 128MB
Flash Size : 128MB
CPLD Version : 001
PCB Version : Ver.A
Mac Address : XXXXXXXXXX

Application program does not exist.
BootRom password: Not required. Please press Enter to continue.

[Ivan_B]

Hi @Asif119 !

Download 1910_5.20.R1519P06 from here - https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JG348A

Unzip it and find .BIN file. Read release notes https://support.hpe.com/hpsc/doc/public/display?docId=a00069965en_us Section "Upgrading software from Boot ROM menus". You need to upload that .BIN file using XModem and set Main attribute. It's all described there.

Hope this helps!