HP v1910 and 2620 - Setting up VLAN between switches with link aggregation

[MichaelRicardo]

[switch 1 HP v1910] ====lag vlan trunk========[switch 2HP 2620]
|| ||
|| ===lag vlan trunk========[switch 3 HP 2620]
||
||===lag vlan trunk========[switch 4 HP 2620]

can someone help with configuration on
HP - is straight forward - i am doing this
 
trunk 47-48 Trk1 Trunk ; uplink to v1910
 
ip default-gateway 10.16.40.2

vlan 1
name "DEFAULT_VLAN"
untagged 2,4,12,16-19,24,32-33,35-38,Trk1-Trk2
ip address 10.16.40.3 255.255.255.0
no untagged 1,3,5-11,13-15,20-23,25-31,34,39-44
exit
 
but
 
how do i do equivalent on v1910? and so that vlan traffic is pased from 2620 to v1910?
 
Regards,
 
Michael