HPE 1950 NOT ABLE TO ACCESS CLI

[TLT84]

Hi Anyone can help,

my HPE 1950 poe switch not able to access CLI after power up. it always show boot menu as below. what should i do to access CLI?

EXTENDED BOOT MENU

1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright

[drk787]

Hi,

Check if the image still exists on the flash by selecting potion 3 from the boot menu, if yes, select option 2 to set the image to boot. If the image file dosent exist, you need to download the required software from the below site based on your product number. Follow the steps in release notes  in the downloaded file under 'Upgrading Comware images from the Boot menu'

You can download the software from:

https://h10145.www1.hpe.com/downloads/ProductsList.aspx?lang=&cc=&prodSeriesId=

You can refer the below post aswel

https://community.hpe.com/t5/Web-and-Unmanaged/HPE-OfficeConnect-1950-Boot-Issue/td-p/6980940#.XaasLZAUmwk