HPE OfficeConnect 1920S Switch Series how to config hybrid port?

[qazplo]

Hi all: 
    I want to config 1920S hybrid port.
    Since 1920S didn't support cli config.
    If I want to config port with below config (It's HPE 1920 configuration)
    How can I do via WebGUI?

port link-type hybrid undo port hybrid vlan 1 port hybrid vlan 100 200 tagged port hybrid pvid vlan 100

 Thanks,

[MstWntd]

Hi,

To configure hybrid port via GUI - you may see "VLAN Port Configuration" (Starting page : 85, onwards) following guide on page
https://support.hpe.com/hpsc/doc/public/display?docId=a00003478en_us

I think that Hybrid is no more available on the newer 1920S switches. We are only seeing 'Tagged' (Trunk) and 'Untagged' (Access) or 'Admit All' (Hybrid) now.

Note : Access, Trunk and Hybrid were Comware commands before. Now, 1920s has different OS, I think all these commands are not available now.

If the above information alleviates your question, please click on Kudos.

Regards,