MIB for 1820 Series

[naktinis]

We have a lot of  HPE1820 starting from 8 port to 24 both nonPoE and PoE variants across the network and are trying to set up monitoring of them all using SNMP but I cannot find where to download MIB files on the site. 1800 are added alongside their firmware but not for these. Any ideas?

[drk787]

The switch supports read-only access to a limited set of MIBs.  The supported MIBs are as follows.

:• BRIDGE-MIB (IEEE 802.1Q)

• LLDP-MIB (IEEE 802.3AB)

• EtherLike-MIB

•IF-MIB

• RFC1213-MIB

• RMON-MIB (RMON History as in v1)

• Power Ethernet MIB (RFC3621), only on switches that support PoE+. (No SNMP information is available on configured PoE schedules.)

This product documentation does not have any link to download these MIBs and I guess since these are the standard MIBs, these should be already preloaded to the MIB Compiler/NMS already which you are using and there is no need to add them to the NMS.