OfficeConnect 1950 - Existing Stack, change from 10GbE to 10Gb DAC

[Jimbo33]

Hi,

Have 3x OfficeConnect 1950 (48 port PoE & non-PoE models) currently stacked via 10GbE Base-T using ports 51 & 52 on each switch.

I want to free up these 10GbE ports and use the SFP+ ports (49 & 50) instead.

My concern is that re-configuring the stack ports, i may overwrite some config on one of the switches... wondering what the best way to do this would be and whether or not there are any special considerations or caveats i should look for?

Bonus question:
If i also wanted to add a 4th 1950 switch to the stack, what's the best way to do this? Keeping in mind, this 4th switch already has a working config that i need to keep when adding to the stack...

Any advice or help would be much appreciated, thanks!

[akg7]

Hi,

Is this switch follows comware command line?

Kindly share product number 'JXXXXX' of the switch.

Thanks!

[MarkosV]

yes it does!

[MarkosV]

You can and a 4th switch similarily as in here:

https://www.youtube.com/watch?v=-IcmyQXtvlw&list=LL9PcdKiwO-U4BwhMBIFJ0hg&index=27&t=369s

Check out this series of videos, they are super helpful!

Unfortunately I have requested the 6th video (referenced in the 5th video) in the series but I never received a response in the Youtube channel.

Maybe HP people reading here can pull the srings to help to publishing it?

[akg7]

Hi,

You can refer my post into below link:

This is a similar kind of requirement and but its for HPE 5800 switch. but IRF concept reamins same.

https://community.hpe.com/t5/comware-based/hp-5800-irf-configuration/m-p/7094730#M12872

Thanks!

[iqnofjmedbq]

---

@akg7 wrote:

Hi,

You can refer my post into below link:

This is a similar kind of requirement and but its for HPE 5800 switch. but IRF concept reamins same.

https://community.hpe.com/t5/comware-based/hp-5800-irf-configuration/m-p/7094730#M12872

Thanks!  Telldunkin

---

Wow, it’s very helpful blog for comments. Will try to follow all these stuff! 

[akg7]

Hi,

Has my post helped you to answer your query?

Thanks!