There is no routing between VLAN HP 1920-48G Office Connect

[Fox56]

Hello!
I have a switch HP 1920-48G Office Connect.
According to the specification it is level 3.
He's the only smart switch in my network. More than others there.

I want to do routing between VLAN.
According to the guidelines, it is necessary to create 2 or more VLANs (considering that 1 already exists)
Then in these VLAN add the appropriate switch ports
Mark them as unagged.
Create a virtual interface for each of the VLANs.
Connect the PC to the required ports with VLAN and assign them gateways to VLAN interfaces.
That is, I perform the standard procedure for setting up VLAN.

As I understand, further routing should work automatically. But unfortunately it does not work.

I addressed this problem with technical support. I changed the switch to an absolutely new one, but unfortunately the problem remained

All firewalls and antiviruses are disabled on hosts

Thank you!

[HP-Browniee]

Hello

Make sure you asign an ip address to your vlan interfaces and make sure your vlan interfaces are UP.

Kind regards

[Fox56]

I'm sure! All interfaces are raised. From each host, I can ping my gateway and gateway of a neighboring VLAN. They are virtual INTERNET VLAN! But between hosts pings do not go. That is, I can not ping 20 VLAN -30 VLANs and from 30 VLAN - 20 VLAN, respectively.
Antivirus and firewall are disabled on both hosts

Http://s019.radikal.ru/i629/1707/37/11a48b388d18.jpg
Http://s011.radikal.ru/i316/1707/7a/9394d4037a2d.jpg
Http://s41.radikal.ru/i091/1707/94/bcb0a088089f.jpg
Http://s16.radikal.ru/i191/1707/7d/183162cbcfa1.jpg
Http://s02.radikal.ru/i175/1707/46/e4fba7477a77.jpg
Http://s009.radikal.ru/i309/1707/f9/fece68bf3f67.jpg
Http://s019.radikal.ru/i601/1707/57/e9cc798a6cef.jpg

[MaheArg]

same problem.... have you fixed it? how???