1850R Teaming Issue

[Brett_25]

Hi,

Has anyone had any problems with teaming a Netelligent 10/100TX PC Embedded UTP/AUI Controller and a Netelligent 10/100TX PCI UTP Controller with the 7.30 version of the new HP Proliant Network Configuration Utility 7 for windows 2000.

I get an x on one of the adapters when I team them, when they are not team the NIC is fine.

Compaq insight manager reports a failed primary NIC when the adapters are team.

Any help from some veterans would be greatly appreciated.

Thanks
Brett

[Mike Price_1]

Brett,
You posted this on the W2K3 forum so I'm not sure if your doing this under W2K or W2K3. If your using the W2K3 the HP Proliant Network Configuration Utility 7 doesnt work properly with the Netelligent NICs on unsupported servers under W2K3. While the PSP will install it ok, it will error out when you run it. I recommend going into the NIC properties and unchecking (de-installing) the HP Proliant Network Configuration Utility 7 for Netelligent NICs. Unfortunately this may not allow you to team though through the standard manner...