2003 server on CL380

[Lemonnnier]

Did Someone try to install Windows 2003 Server on a proliant CL380.
I used the procedure "Implementinng Microsoft Windows Server 2003 Enterprise Edition RC2" without succes.
After i created a disk Q: on my shared device I can create my cluster on Node 1. But if i try to start Node2, I have a Blue screen on Node 1.

Does someone can help me ?

[Roger Faucher]

Here's a link to all the latest and greatest updates for W2K3: http://h18023.www1.hp.com/support/files/server/us/locate/69_1125.html

Roger

[Lemonnnier]

Thank you Roger, but this is what i did. I used the "ProLiant Support Pack for Microsoft Windows Server 2003 " and upgraded all flash ROM to be sure to have the latest version.

[Roger Faucher]

If you've upgraded all the Drivers, Firmware, Software, and Utilities, I suggest you try to run Diagnostics for Windows under Software - System Management.

Hope this helps!

Roger

[Lemonnnier]

I find my mistake.
It's a bad driver.
I need to use the Compaq 64-bit Ultra2 SCSI Controler/P from Compaq and not the french Microsoft one.
Thank you for your help Roger

[Sean Jacobsen]

I have the same scenario
Where did you obtain the driver for
64-bit Ultra2 SCSI Controler/P