HPE Community
Windows Server 2003
1833868 Members
1896 Online
110063 Solutions
New Discussion

Event id 9

 
Alberto Mendoza
Advisor

‎09-20-2005 08:25 AM

‎09-20-2005 08:25 AM

Event id 9

Hi

I have the following error in the server:
Type: Warning
Event ID: 9
User: N/D
Description: "The device, \Device\Scsi\ql23002, did not respond within the timeout period"

This error is show in the event viewer every 8 minutes.

This server is node of the cluster.


Thanks
0 Kudos
2 REPLIES 2
Ivan Ferreira
Honored Contributor

‎09-20-2005 08:58 AM

‎09-20-2005 08:58 AM

Re: Event id 9

I think that ql is the HBA driver.

Verify that your firmware/driver for the HBA adapter are updated. Verify that you are not getting connection errors to the SAN.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Steven Clementi
Honored Contributor

‎09-20-2005 09:19 AM

‎09-20-2005 09:19 AM

Re: Event id 9

Alberto:

This can usually mean that you have a connection problem with your hba or with your SAN switch, perhaps a bad hba or a bad port transceiver or even a bad fibre cable

Check the event log on your SAN switch as well.

The warning is the driver response to a query to the SAN Switch for either information from the Name Server or a request to access a device that has reached the "timeout period" and has not jet received anything.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.