HPE Community
Windows Server 2003
1822458 Members
2524 Online
109642 Solutions
New Discussion

How do determine that raid 1 is configured on a windows 2003 server

 
Leke
New Member

‎08-19-2005 05:04 AM

‎08-19-2005 05:04 AM

How do determine that raid 1 is configured on a windows 2003 server

Hi everybody

I just implemented SATA RAID 1 on my Windows 2003 server, but I'm not sure wether RAID 1 was actually implemented.

Can you please tell me how to determine wether RAID 1 was actually configured on a Server 2003.

Thank you very much.

Leke Nigeria
0 Kudos
1 REPLY 1
Ivan Ferreira
Honored Contributor

‎08-19-2005 07:10 AM

‎08-19-2005 07:10 AM

Re: How do determine that raid 1 is configured on a windows 2003 server

Basically, if you have a hardware RAID 1, you should use the BIOS utility or the software utility that you used to configure the raid to verify the configuration.

If it is a hardware RAID, you will see only one disk device instad of two in the windows "disk management" mmc.

If it is a software RAID, you will see two disks on the disk management mmc but mirrored (See the legend and the colours).
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.