Windows Server 2003
1823178 Members
3768 Online
109647 Solutions
New Discussion юеВ

HP Network Configuration Utility 7 question:

 
SOLVED
Go to solution
steveb_1
Occasional Contributor

HP Network Configuration Utility 7 question:

We have this utility installed on a DL360 and I can't find out any info on this problem:

We have 2 NIC's teamed. One has a red cross on it and the team status is downgraded (yellow). The nic with the cross failed Rx heartbeat on the information tab, there's also way less daat transferred In/Out in the Statistics tab than the other NIC. The other NIC seems to be working fine. Do I have a faulty NIC? How can I check?

The server does alot of data transfer over the network and it seems slower, consistent with the NIC being faulty.

Thanks for your help!
Steve
4 REPLIES 4
Roger Faucher
Honored Contributor
Solution

Re: HP Network Configuration Utility 7 question:

Steve:

I would try breaking the team, then removing the NIC from Device Manager and re-detecting it to see if that gets rid of the red cross. If so, then re-team.

Make a great day!

Roger
Make a great day!

Roger
steveb_1
Occasional Contributor

Re: HP Network Configuration Utility 7 question:

thanks Roger, your suggestion helped. I dissolved and rebuilt the team. I also had an issue with network cables that contributed, but your help fixed the problem.

Much appreciated!

Steve
itnas
Advisor

Re: HP Network Configuration Utility 7 question:

Really Answer is right but it is not solving problem.
Problem is that it happen very often
from one SupPack to another.
Matthijs Wijers_1
Trusted Contributor

Re: HP Network Configuration Utility 7 question:

What type NIC are you using?
Did you upgrade the firmware to the required level for the drivers?

Regards,
Matthijs