HPE Community
Windows Server 2003
1827245 Members
2771 Online
109716 Solutions
New Discussion

ML350 G3 w/ 2003 Server and SA5312 or SA641

 
Kristopher Hornsleth
Advisor

‎11-23-2004 07:10 AM

‎11-23-2004 07:10 AM

ML350 G3 w/ 2003 Server and SA5312 or SA641

I have several ML350 G3 servers that have either the SA5312 or SA641 controller. Both of these devices use the Smart Array 5x and 6x controller driver. When I try to download my image that was created with the SA5312 it won't boot using the SA641. The OS gets to the 2003 loader screen then just reboots. Can anyone provide some insight?
0 Kudos
1 REPLY 1
Robin_37
Trusted Contributor

‎11-24-2004 12:00 AM

‎11-24-2004 12:00 AM

Re: ML350 G3 w/ 2003 Server and SA5312 or SA641

Hi Kristopher
I suggest you create the image using both the controllers. i.e. suppose your server harddisk are connected to SA531 install an SA641 in the same server and create the image. so the OS will have drivers for both the controllers.

Regards

Robin
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.