Windows Server 2003
1822512 Members
2483 Online
109642 Solutions
New Discussion юеВ

NIC issue - 802.3ad aggregation fails after server reboot

 
Alexandre Rappoport
New Member

NIC issue - 802.3ad aggregation fails after server reboot

Hi,
We have 2 NIC HP NC7782 teamed using protocol 802.3ad. (1GB+1GB=2GB). When we reboot the server, the aggregation fails, leaving the server off the network.(ipconfig is blank)
the error from the sys evt is : 802.3ad link aggregation (LACP) has failed. ACTION: Ensure all ports are connected to LACP-aware devices.
The quick fix is using the ILO console and refresh the config, without restart.

Anyone with an idea?
Many thanks for your answers...
4 REPLIES 4
Daniel Leblanc
Honored Contributor

Re: NIC issue - 802.3ad aggregation fails after server reboot

Whats is the firmware(latest is 1.0.13) and driver version(latest is 9.81)?
Remove the connection and dont upgrade remove and redoo ITEMS NIC,managing hardware.
Br├бulio
New Member

Re: NIC issue - 802.3ad aggregation fails after server reboot

Hi,

I'm having the same problem to...

I've updated NIC firmware in all HP DL360 G5 server's including x64, updated for several times and versions the latest NIC driver's, latest Team driver's and at this moment I have the VCA for all machines Up to date and the problem remainds.

When the machine is rebooted, the Team tries to Adquire an IP Address from DHCP, but the team it's configured with fixed IP.

The workaround I have found to put the team working again until the next reboot, it's to disable the Team connection in the Network properties and Enable it again and the connection it's restablished again with the configured IP address.

I have already uninstalled Team software, reeboted the server, installed the Team software again and made the network configurations. The problem seems to be resolved but after a few reboots it appear again.

Some one could help with this.

Thanks.
Cijntje
New Member

Re: NIC issue - 802.3ad aggregation fails after server reboot

I am having exactly the same problem. Have had it before on onse server DL380 and thought server was defective. Hav just yesterday installed a DL360 G5 with latest drivers and firmware with exactly the same problem, need to disable and then enable Team NIC to get a connection.
Br├бulio
New Member

Re: NIC issue - 802.3ad aggregation fails after server reboot

Problem workarounded: I had to change the team mode to SLB. And now it's working fine after several reboot's.

I hope this can help someone.