riprep image not in choice list

[Chris Watson]

I installed a VectraVE6 using an RIS image on my w2003 server. I then used riprep to upload an image of that client.

Now when I use that same client (10 minutes later) to reload that new image, it is not listed. I have restarted the RIS service but no change.

Any ideas?

[Jon Finley]

I would assume that you need to add the new image in to the server.

"From the Image tab of RIS server Properties, you can add new Risetup images to your RIS server based on an operating system CD that you provide. If you click the Add button on the Images tab, a dialog box displays with an option that starts the Risetup Wizard."

http://www.microsoft.com/resources/documentation/WindowsServ/2003/all/deployguide/en-us/Default.asp?url=/resources/documentation/WindowsServ/2003/all/deployguide/en-us/acicc_ris_rvvt.asp

Jon

[Andrew Lukaszewski]

I have come across this exact same issue, where riprep images created on Broadcom NetXtreme equipped PC's are not viewable by other PC's.
To double check my findings, I disabled the onboard broadcom adapter and installed a 3com 905 card and created the image again - this time that images WAS viewable by other PC's in the organisation.... but not by the Broadcom NetXtreme models!!!?!
Looks like I will need to create two RIPREP images, one bring from a Broadcom NetXtreme card - but at least they both wont show at the same time. lol.