Teaming problem

[matteo tg]

I have some problem regarding NIC teaming.

DL580 G5
Windows 2003 stn installed.

Onboard HP NC373i Multifunction Gigabit Server Adapter * 2EA
Drive version 3.4.10.0
drive date: 2007-05-25


I have tried a teaming for above NICs using HP teaming utility.
Created newly teaming interface.
i did setting an ip address on newly teaming NIC. but didn't work.

when i run a HP Teaming utility again, NICs didn't teaming.

rebooed server, above problem still on.

following is System event error ID
-----------------------------------
CPQTeamMP
ID:148\
TeamMember ID: 1
PROBLEM: This Teaming Protocol-Edge Configuration Parameters section of the Reg
istry has an Invalid, illegal or unsupported, value for the LcdRssCapsCapabiliti
esFlags Parameter. Setting value to 0. ACTION: No action is required if the Defa
ult behavior is acceptable. Otherwise, reconfigure the LcdRssCapsCapabilitiesFla
gs value or reconfigure the team.


CPQTeamMP
ID:50
TeamMember ID: 0
PROBLEM: This Teaming Protocol-Edge Configuration Parameters section of the Reg
istry is either missing the LcdRssParmsIndirectionTable Parameter, or the Parame
ter is unreadable. Setting value to 0. ACTION: No action is required if the Defa
ult behavior is acceptable. Otherwise, reconfigure the LcdRssParmsIndirectionTab
le value.


Any help would be appreciated.

Thanks,

matteo

[Phil.Howell]

there were problems using rss with the nc373i
make sure you have updated to driver cd 8.2 and psp 8.1
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3288134&prodTypeId=15351&prodSeriesId=1121516&swLang=8&taskId=135&swEnvOID=1005