HPE Community
Windows Server 2003
1834285 Members
2263 Online
110066 Solutions
New Discussion

Thin clients t5300 hangs when new image applied

 
Manny Badoe
Occasional Contributor

‎06-03-2004 11:28 PM

‎06-03-2004 11:28 PM

Thin clients t5300 hangs when new image applied

I have applied a new image - 4.21.053.1.8 and BIOS 786W2 v1.10 to a T5300 Thin Client. The idea is to upgrade and configure the unit (i.e. removing various applets in Control Panel and configuring as per standard Desktop)and use the resulting image for our other units.

I have managed to the above successfully, however when I reboot the unit I lose network connectivity. I monitored to see where the network lights go out, and it seems to be at the point where its LOADING.

I am not sure why this is happening. I thought the upgrade was to enhance the features and not impact connectivity. Can anyone help please?

Regards

Manny
For though a righteous man falls seven times, he rises again!
0 Kudos
2 REPLIES 2
Roger Faucher
Honored Contributor

‎06-04-2004 07:27 AM

‎06-04-2004 07:27 AM

Re: Thin clients t5300 hangs when new image applied

Manny:

Have you tried installing the new drivers, software, and OS enhancements from here:

http://h18007.www1.hp.com/support/files/ThinClients/us/locate/92_5589.html

Make a great day!

Roger
Make a great day!

Roger
0 Kudos
Manny Badoe
Occasional Contributor

‎06-06-2004 08:15 PM

‎06-06-2004 08:15 PM

Re: Thin clients t5300 hangs when new image applied

Hi Roger

Problem was due to network speed not set to the speed at the hub end. Its fixed now.

Thanx

M

For though a righteous man falls seven times, he rises again!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.