Win 2003 SBS cant find SATA Raid set

[Steve Greenwood]

I have ML110 G2 out of the box. fitted 2 x 160gb SATA drives on 0 and 1 sata connectors on motherboard.
what exactly are bios settings to enable correct raid.
I have enabled a raid 1 config (using utils and array config etc) but Win2003SBS and driver from floppy etc still do not allow set up beyond "do set up windows press enter" blue screen etc. without error message.
CD supplied with Server tries to boot a Linux environment but fails. Clleague has suggested a smart start CD but where do I get that.
Should I just install a Silicon Image sata controller card in a pci slot and try that!!!
All help gratefully appreciated at this point

[Igor Karasik · Accepted solution]

Please see this thread http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=964696

SmartStart CD not supported for ML 110.

Regards, Igor