LDEV BOX Capacity Analysis

[WW316110]

I have Xp1200 I need to check LDEV Box used and free capacity can any one help me out..

The below out I have calculated manualy, is it possible to get in Performance Advicer.

Ex:
=====

BOX 1 (B4 #) MB
========================================
PG Total Space Free Space Used Space
=========================================
1-1 959669.436 103502 856167.436
1-2 959720.749 12519.5 947201.249
1-3 959728.062 801006.5 158721.562
1-4 959728.875 806127 153601.875
1-5 1923906.436 582463 1341443.436
1-6 1923914.625 1411914 512000.625

[PP BIJU KRISHNAN]

Hi,

When you login to the CV for XP, you should be able to see a summary.

I have worked on HDS products and HSSM was close to providing this report. HSSM is infact HP's APPIQ.

HP also has some other reporting tools that can provide this info.

Regards,
Biju Krishnan

[WW316110]

I dont have CV in my environment we R using Web console.
Any other tools is there ?

[PP BIJU KRISHNAN]

Just login into the web console and post the first screen shot here.

Apologies for not providing the exact reply since I have worked on the HDS variants and hence a bit doubtful about how the HP solution would look.

[WW316110]

Pls find the XP1200 Web console page with BOX1 details...

Thanks in advance....:-)

[PP BIJU KRISHNAN]

Well click on the topmost button on the left - identity and systems.

u should see a summary. Unallocated space, number of unallocated LDEV's etc.

But you would for sure need more information, this should be possible via the HSSM equivalent in HP.

Also try asking your HP rep, in my prev job, HP has provided us detailed reports of XP in XL with foll information.

RAID Group Sort RAID Group RAID Level DKA RAID Group Members Drive Type Disk Size LDEVs Space MB Unassigned LDEVs Unassigned Space MB

[Frank Neumann]

@WW316110

Did you already got what you wanted?

There several ways to get a summary of used and unused space off an XP. The easiest way is to look at the entry page of RWC (XP1024 and above), as already mentioned above.

There is IMHO no automated way to get detailed usage information for each of the B4's, even not with our internal tools. If one of my customers does need it, I would also do a manual calculation. But this happens rarely, I hardly remember 2-3 times last 10 years.

Regards
Frank

PS.: Btw. the correct name of the array is XP12000 ;)

[WW316110]

Sorry for the dealy KRISHNAN .

Frank I am doing manual calculation for the BOX CU:LDVE calculation(Used, Free space)

many thanks to KRISHNAN and Frank.