HPE Community
XP Storage
1841635 Members
3813 Online
110182 Solutions
New Discussion

Lun Zero handling in a dual-array SAN

 
SOLVED
Go to solution
ian Dennison
Regular Advisor

‎11-25-2003 09:51 PM

‎11-25-2003 09:51 PM

Lun Zero handling in a dual-array SAN

We have a 2 Fabric SAN with an XP512 already connected, and are looking at adding an EVA-3000 Array.

I have been told that Lun 0 (Zero) is treated differently by these 2 arrays, so we cannot mix them in the same zone(s).

Is there any good doco on how Lun Zeros are managed? Also, on zoning recommendations?

Thanks. Ian Dennison
Lets do it to them before they do it to us! www.fred.net.nz
0 Kudos
Reply
2 REPLIES 2
florence mathon lermusi
Trusted Contributor

‎11-26-2003 07:15 PM

‎11-26-2003 07:15 PM

Solution

Re: Lun Zero handling in a dual-array SAN

HI,

you can find a full of info in the " HP SAN design Guide" (on http://h18006.www1.hp.com/products/storageworks/san/documentation.html)especially on the rules to apply if you want to mix XP and EVA on a same fabric.

regards
Reply
ian Dennison
Regular Advisor

‎11-26-2003 07:51 PM

‎11-26-2003 07:51 PM

Re: Lun Zero handling in a dual-array SAN

Mathon,

Magic answer, more than enough information!

Share and Enjoy! Ian
Lets do it to them before they do it to us! www.fred.net.nz
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.