Posted to: ProLiant Servers (ML,DL,SL)
an hour ago Bonjour,Je suis à la recherche d'informations pour un problème de détection de disque M.2 (1To),--> disk installés sur la carte mère du server au emplacements prévus (points "4" sur le synoptique du server),J'ai mis à jour l'ensemble du server avec ... Posted to: Servers - General
yesterday Hi all,Following up on my original post about MicroServer Gen11 fans stuck at 100% when using non-HPE drives, I have been in direct contact with HPE support, repeatedly asking for escalation to product management and/or engineering.Instead of engagin... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hi all,Like many of you, I've been dealing with the well-known issue of fans spinning to 100% when using non-HPE drives in ProLiant servers. On my MicroServer Gen11 with Seagate Exos X24 24TB drives, the noise was unbearable - despite the drives runn...
Posted to: HPE Synergy
09-18-2025 Good afternoon, I have a two-frame Synergy environment with Virtual Connect SE 100Gb F32 Module modules. It is currently configured with (4) 10Gb SFP's(ie.2 per frame) in a lacp configuration as designed. The 10Gb SFP's are in Q3:1 and Q4:1 in both f... Posted to: ProLiant Servers (ML,DL,SL)
07-23-2009 We have an installation of nine Proliant DL140 G3 servers, just less than 3 years old. 2 months ago, we had a problem after a power cut where 2 of these servers refused to start (we were even unable to enter the BIOS menu). We replaced the CMOS batte...
Posted to: ProLiant Servers (ML,DL,SL)
10-27-2023 What's up with CMOS batteries today? It seems they don't last longer than 2-3 years anymore. I remember times when 20 years old systems still had their first CR2032 inside and it was still good.But even worse is the design decision to prvent servers ... Posted to: ProLiant Servers (ML,DL,SL)
yesterday DL380 Gen12 with Windows 2022 and iLO7I'm trying to install the HPE iLO Online Configuration Utility with no success. iLO Channel Driver is installed. In hardware manager, I see a iLO7 (CHIF) device, but compared to a Gen8, there is no iLO7(core) dev... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago We have a strange problem here... (HPE 12TB SATA-6G, 653948-001, HGST HUH721212ALE604)Customer's DL360 Gen10 failed all 4 12TB SATA drives in RAID 0+1. We tried to re-enable the logical drive with no success. So finally we replaced all 4 drives with ... Posted to: Servers - General
yesterday Hello,I am experiencing different NVMe namespace behavior between HPE Gen9 and Gen10 servers and would like clarification.EnvironmentServer 1:HPE DL380 Gen10 (non-Plus)Dual Intel Xeon Gold CPUsESXi 8.0 U3 (HPE custom image)Intel SSD DC P4608 6.4TB (O... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday I have two new ProLiant DL380 Gen11 servers running SUSE Linux Enterprise Server 15 SP7. These servers form a cluster and are used for PostgreSQL.I had a freeze on the first server two days ago. Today, I had the same freeze on the second server. The ...
