Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
BladeSystem Server Blades
Showing results for 
Search instead for 
Did you mean: 

BL460c G6 rebuild do not start


BL460c G6 rebuild do not start

One of the HDD has failed. I stopped the server, replaced the HDD, started the server. ACU now tells me "Ready for recovery", but  rebuild will not start.
I have read here "RAID 1 (+0): breaking mirrors and rebuilding drives" rebuild will start automatically if hot insert the HDD, and if not, the controller will disable the volume. I can not stop the server again, what can I do to start the rebuild.


Re: BL460c G6 rebuild do not start


Could you generate the Array Diagnostics Utility report from ACU and upload it please?


Click tab Diagnose in ACU and click generate report to get it.






I work for HP
To say thanks click the white "thumbs up" icon below!!!