BladeSystem - General
1754183 Members
4818 Online
108811 Solutions
New Discussion

how to boot the server without cache

 
pant44
Occasional Contributor

how to boot the server without cache

Hi!!  There is one server BL680c G5 server. In this server if the cache module is not placed in the board, the server doesn't get boot. It gives the message "controller self test failed". Is there any option through which we can disable the cache so that if there is no cache still the server can boot. Thnks in advance...

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: how to boot the server without cache

Some RAID levels need a cache module to work, the controller cannot present LUNs without the cache module.

What exact message do you get during POST?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pant44
Occasional Contributor

Re: how to boot the server without cache

hi thanks for the reply... There is not any major issue..I just wanted to know for my knowledge whether it is possible in this server or not to boot without cache module...
Thanks once again for the reply
PGTRI
Honored Contributor

Re: how to boot the server without cache

hi,

 

This server has a P400 controller and the P400 controller can not work w/o cache. It's not possible to disable it.

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!