Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

No notification about RAID array failure

Florian Heissenhuber
Occasional Visitor

No notification about RAID array failure

I've installed SuSE Linux 8.1 on a ProLiant DL380 G2 that runs absolutley fine.

Further I installed the "hp Server Management Drivers and Agents for United Linux 1.0". The management drivers and agents run fine and without any errors. I'm getting lots of information about my system including temperature, fans, disk space, components, etc. The integrated management log shows information about hw failure e.g. power supply.

However, I don't get any information or status messages about the status of the raid array (e.g. disk failure).

What do I need to get information about the status of the RAID array? Any idea?