sfp+ link down

[andrey-stv]

SFP+ E7Y10A 

Добрый день,
Закупили модули SFP+ E7Y10A и оптические шнуры в соответствии с тех. описанием к ним (MM 50/125 OM4 lc/pc-lc/pc 5м). Установили патч корды в sfp+ модули, при включении модулей в сервер линк не поднимается, Шнуры рабочие, проверили на XBIT SFP+16G-SR (SFP+, 16Gb/s, Fiber channel, 100m, 850nm, MM, 2LC, DDM) (что было в наличии). Подскажите в чем может быть проблема?

SFP+ E7Y10A no link

Good afternoon,
We purchased SFP+ E7Y10A modules and optical cords in accordance with the technical specifications. description of them (MM 50/125 OM4 lc/pc-lc/pc 5m). We installed patch cords in sfp+ modules, when plugging modules into the server, the link does not rise, the cords are working, checked for XBIT SFP+16G-SR (SFP+, 16Gb/s, Fiber channel, 100m, 850nm, MM, 2LC, DDM) (which was available). Tell me what could be the problem?

[Cali]

Hi Andrey,

where did you plug it in?

As I found, this Modul is only listed for: HPE Virtual Connect SE 100Gb F32 Module for Synergy

Nothing else.

My first check is always: Hold the Camera from my Handy to the SFP and check if there is a Laser Light on one Port

Cali

[andrey-stv · Accepted solution]

The problem was that someone during installation or during transportation, somehow broke the patch cords by putting something heavy on them or something else, there were even characteristic dents on the patch cords. Because of this, they did not work.
The problem is solved, thanks for the help to everyone who responded.