Link Aggregate : 5500 to 2530

[MarkAM]

Good day,

Can you please help me in configuratio of my 5500 and 2530 switch for link aggregation. And suddenly my 2530 can' connect to 5500.

5500 config.

#

interface Bridge-Aggregation1

port link-type trunk

port trunk permit vlan all

#
#interface GigabitEthernet1/0/1

port link-type trunk

port trunk permit vlan all

port link-aggregation group 1

#

interface GigabitEthernet1/0/2
port link-type trunk

port trunk permit vlan all

port link-aggregation group 1

2530 config

#vlan 1 tagged ethernet 24

Thanks,

[Vince-Whirlwind]

On the 2530, port 24 is uplinked to the 5500 - what is the second port on the 2530?

[LindsayHill]

As alluded to above, you'll need to provide some more complete configuration & topology.

Taking a guess though, it looks like you're now tagging VLAN 1 on the 2530, but probably not on the 5500. You'll want to be consistent with your native VLAN (PVID) between both switches.

[MarkAM]

Sir,

I only have 1 2530 and I want is to have redundacy connection to 5500 which is my MDF.

[MarkAM]

Lindsay,

Im tagging Vlan 1 to my 2530 and it also my source of vlan is my 5500 (MDF). And also this 2530 will only allow VLan 1, And i will be configuring my 5500 trunks that only allow Vlan 1.

[Vince-Whirlwind]

If you untag VLAN1 on port24 on the 2530, then the switches should see each other over VLAN1.
(Or, tag VLAN1 on the 5500 interface that is patched to the 2530).

You've created a bridge-aggregation on the 5500, but you only mention 1 port on the 2530 - do you have a 2nd port on the 2530 that is patched to the 5500?

[MarkAM]

Sir Vince,

Im planning to use port 23 - 24 of 2530 can you please post tags for bridge-aggregation.

thanks,

[LindsayHill]

Can you post more complete configurations, and more about what you're trying to do?

Presumably your 2530 has more than a single line of configuration on it? 

What LACP/trunk configuration does it have? 

What other configuration do you have associated with those interfaces?

What other configuration do you have on those interfaces on the 5500?

It's still unclear what configuration you already have, and what you're trying to do.

[Vince-Whirlwind · Accepted solution]

trunk 23-24 trk1 trunk