LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

Assign IP address to multiple devices

 
SumitP
Occasional Contributor

Assign IP address to multiple devices

Hello,

I have a problem. I have multiple devices (Sensors) and each sensor has the same IP address and same MAC address as the others and I can't modifiy them. I have a HPE 1950 JG963A switch and I want to map the IP adress from device/port to another IP address.

for example if I connect ethernet cable to port number 47, whatever data comes in should be mapped to the address 10.10.1.47.

1 REPLY
parnassus
Honored Contributor

Re: Assign IP address to multiple devices


SumitP wrote: ... I have multiple devices (Sensors) and each sensor has the same IP address and same MAC address as the others and I can't modifiy them.

I seriously doubt there are ethernet devices with factory duplicated MAC Addresses (MAC Addresses are intended to be uniques)...IP Addresses and MAC Addresses are differents and MAC Addresses should be uniques WRT the Ethernet devices they represent.