ProLiant Servers (ML,DL,SL)
1827609 Members
3134 Online
109966 Solutions
New Discussion

Array Configuration Utility information

 
Ayman Altounji
Valued Contributor

Array Configuration Utility information

There are no physical drives attached to the Compaq Smart Array Controller in the Embedded Slot.
1 REPLY 1
Mark Cloutier
Respected Contributor

Re: Array Configuration Utility information

without any further info I am assuming that you DO have the embedded ROC (raid on chip) controller..to confirm this look on your system board...locate the scsi connectors...to the right of the second one there is a small white socket that should have the controller in it..it will look something like a laptop memory dimm with transistors on it..if it is there then confirm that your drive cable is attached to slot 2 .thats the scsi connector closest to this chip..when that chip is in port 2 becomes the default array channel and port 1 stays open for standard scsi...
We are here for a good time, not a long time!