HPE Community
ProLiant Servers (ML,DL,SL)
1756751 Members
3443 Online
108852 Solutions
New Discussion юеВ

Re: Cannot see shared storage

 
Ayman Altounji
Valued Contributor

тАО01-16-2001 04:00 PM

тАО01-16-2001 04:00 PM

Cannot see shared storage

System is out of box with 1x 18GB in each node (temp) and 4x18GB in shared storage.
Should the SCSI card in node 1 see the CR3500 as an attached device at boot up? Currently, it reports no attached devices. HELP?
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО01-30-2001 04:00 PM

тАО01-30-2001 04:00 PM

Re: Cannot see shared storage

Continue... It is very important that you check for each node the SCSI ID. The SCSI ID must be different on each node. For example : Node1 has SCSI Controller on port 1 with SCSI ID 6 and on port 2 SCSI ID 7. For Node 2 SCSI Controller on port 1 with SCSI ID 7 and on port 2 SCSI ID 6. This way you will not have SCSI errors our strange faults.
0 Kudos
Reply
Ayman Altounji
Valued Contributor

тАО02-22-2001 04:00 PM

тАО02-22-2001 04:00 PM

Re: Cannot see shared storage

If this didn't fix the problem, let us know - email support@compaq.com
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.