Compaq Proliant 800 6/400

[unix.master26]

Hello,

I have this Compaq Proliant 800 6/400 Series server, but I need to know what CPU's are supported and their Speeds and also bus speeds

Hope someone can help

Thanks

[Vijay_44]

The PL800 supports up to a PIII 600 processor, but the board that support the PII 400 can go up to a maximum PIII 500

[unix.master26]

Are you absolutly sure the 6/400 series will take a Pentium 3?

I took the side panel off the server and on the panel sticker, it only lists 'DIP Switch' settings for up to the P2 450?

[Oleg Koroz]

Processor board used in several servers however some modifications requires to change PPM, I/O Board
here is something for research and review

http://h18000.www1.hp.com/products/servers/ProLiant800/index3.html
PII 450 you can install, however if you willing to install PIII you need extra kit

find where say's from Overview:

... To upgrade 400-MHz, 450-MHz, or 500-MHZ models to 550-MHz or 600-MHz or when upgrading a 550-MHz to the 600-MHz model, installation of an additional Thermal Upgrade Option Kit (144003-B22) is required...

http://h200002.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_313656-001_ch1/TPM_313656-001_ch1.pdf

http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=313622-001

same Processor Board used in
http://h20141.www2.hp.com/hpparts/Part_Where_Used.asp?mscssid=7X6VGTMEFRE39HEQMH7NE79TRKPQ3GUC&SearchCriteria=313622-001

if your board able do 400 options
http://h20141.www2.hp.com/hpparts/Search_Results.asp?mscssid=7X6VGTMEFRE39HEQMH7NE79TRKPQ3GUC

http://www.trademoon.com/SearchResult.aspx?KeyWords=313622-001

[unix.master26]

Thank you all very much for your knowledge and assistance, of which I greatly appreciate :)