Installing NT4 on a Proliant G3 ML350

[James Sandham]

This server does not seem to support this out of the box. We have an old server which we are going to replace and for some reason keep NT4 on the new one. Any one got any ideas how to make this happen. It says on the support site that NT4 is suppported but no instructions anywhere. Do I just cross fingers and put disk in.
Here's hoping one of you guys has had to do this thankless task before me.
Cheers
JS

[Phillip Williams_2]

James: I just cehecked with "QuickSpecs" and that says (at...
http://h18000.www1.hp.com/products/quickspecs/Division/10481.html
)
re OS support "
OS Support Microsoft Windows NT® Server 4.0 and Terminal Server 4.0
Microsoft BackOffice Small Business Server 2000
Microsoft Windows 2000 Server and Advanced Server
Windows Server 2003
Novell NetWare 5.1, 6.0
Novell NetWare Small Business Suite 6.0
SCO OpenServer 5.0.6a
SCO OpenUnix® 8 SCO UnixWare® 7.1.1
IBM OS/2 Warp Server for e-business
LINUX (Red Hat, 2.1 Advanced Server, Red Hat 8.0 and Red Hat 7.3, SuSE, SLES7, UnitedLinux 1.0)
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf.
NOTE: Optional hardware may be required to support some operating systems.
NOTE: For an up-to-date listing of the latest drivers available for the ProLiant ML350, please see: http://www.compaq.com/support/files/server/us/index.html.

"

Also at the "Download drivers & software NT 4.0 related stuff is heavily listed so I would advise go ahead it shoudl work & HP will come and help.

See "
http://h18023.www1.hp.com/support/files/server/us/locate/7_4678.html
"

Hope that helps,

[James Sandham]

The smartstart software does not support NT4 so is it a case of booting from nt server cd. and sucking it and see. After dloading all drivers of course.