Only LUN0 visible on SAS connected server

[mardenit]

Hi All,

We have purchased 2 x DL380 40 core servers both with HPE E208e-P SR dual port 12gbps SAS controllers.

We purchased an Infortrend GSa2024RT SAN with dual 12Gbps SAS controllers.

Currently I've got one server connected to one of the ports on the SAN.

I've created two disks on the SAN and mapped them to the controllers.

When I go into my Server 2019 disk manager screen however I see only 1 disk.

From doing some experimenting, it appears that only drives that are mapped as LUN0 appear on the server.

I'm completely stumped, anyone got any ideas ?

Paul.

[ShruthiSK]

Hi, 

This needs to be further looked into. 

Hence please log a case with HPE support. 

Regards,

Shruthi

[imafinifer]

Hi,

I have the same problem with Infortrend DS3024.

Was it solved?

[JoannaZ]

Solved? Same issue

[Sunitha_Mod]

Hello @JoannaZ,

Thank you for writing to us. 

You might want to consider creating a new topic by utilizing the "New Discussion" button, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.