HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL380 G7 virtualization setting in BIOS

 
SOLVED
Go to solution
DLT
Occasional Advisor

Proliant DL380 G7 virtualization setting in BIOS

Hello,

I have a Proliant DL380 G7 that I want to install Microsoft Windows 2008 R2 Ent. with Hyper-V and I need to make sure the hardware assisted virtualization is enabled in the BIOS.  is there a document/link on HP site that shows the recommended BIOS settings for virtualization? 

 

Thanks,

D

2 REPLIES
Johan Guldmyr
Honored Contributor
Solution

Re: Proliant DL380 G7 virtualization setting in BIOS

Hi, why not just boot into BIOS and see if it's enabled or not?

If there is a document it sounds like it would be a whitepaper.

See this page:
http://h18000.www1.hp.com/products/servers/software/microsoft/virtualization/

And at the bottom there is a link to a whitepaper.

See direct link to "Implementing Microsoft  Windows  Server 2008 Hyper-V ™ on HP ProLiant server" for more information:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01516156/c01516156.pdf
DLT
Occasional Advisor

Re: Proliant DL380 G7 virtualization setting in BIOS

Thanks!! the pdf doc is what I needed!!