SAS HDD для ProLiant DL160 Gen9

[EvrazTekhnika]

Добрый день. Требуется консультации HPE. Есть сервер ProLiant DL160 Gen9(s\n:CZ271702P8), сейчас на нем установлено 8x300Гб (SAS HDD, 4790A0ZSFXFD1714-один из серийных номеров) дисков. Контроллер - Smart HBA H240. Диски работают в RAID1+0, планируется замена дисков на более емкие по 8Тб для работы нового ПО(диски тоже будут в RAID1+0).
По спецификации https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04375607# (стр.23) выбрали диски: "HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD" (861590-B21). Прошу подтвердить, подойдет ли данная модель дисков на замену существующих на указанном сервере. Если не подойдет, то какие варианты? Также прошу уточнить кол-во дисков данного типа, которое будет поддерживаться сервером.

Google Translated

Good day. HPE consultation required. There is a ProLiant DL160 Gen9 server (s \ n: CZ271702P8), now it has 8x300GB (SAS HDD, 4790A0ZSFXFD1714 is one of the serial numbers) drives. Controller - Smart HBA H240. The disks work in RAID1 + 0, it is planned to replace the disks with more capacious 8TB for the new software to work (the disks will also be in RAID1 + 0).
According to the specification https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04375607# (p. 23) selected disks: "HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD "(861590-B21). Please confirm whether this model of disks is suitable for replacing existing ones on the specified server. If not, what are the options? I also ask you to clarify the number of disks of this type that will be supported by the server.

[Shrey27]

Hello EvrazTekhnika ,

Please find the below supported features for H240 Controller

Standard Features

• Storage interface (SAS/SATA)

o 8 physical links across 2 x4 internal ports

o 12Gb/s SAS, 6Gb/s SATA technology

o Mix-and-match SAS and SATA drives to the same controller

o Support for SAS tape drives, SAS tape autoloaders and SAS tape libraries

• PCI Express Gen3 x8 link
• RAID 0, 1, 5, 10
• Simple RAID or HBA mode
• Legacy and UEFI boot operation
• Up to 200 physical drives
• Up to 64 logical drives
• HPE Secure Encryption (optional license)
• Seamless upgrades to other HPE Smart Array P-series controllers
• PCI Express standard plug-in card o Dimensions: 6.6 x 2.7 x 0.6 in (16.8 x 6.86 x 1.6 cm)

Reference: https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04346303

Also the part no. 861590-B21 corresponds to the spare part no. 861607-001 which shows for use with Gen8/Gen9 or newer:

861607-001

8TB SAS hard drive - 12Gb/s interface, 7,200 RPM, 3.5-inch large form factor (LFF), smart carrier (SC) - For use with Gen8/Gen9 or newer

Also please find the below quick specs for DL160 Gen9 server representing the list of compatible parts to be used with the server:

https://h20195.www2.hpe.com/V2/Getdocument.aspx?docname=c04375607

Disclaimer : Data integrity is customer responsibility. HPE recommends to have data backup frequently and before performing any activity so that it can be restored during disaster recovery. Also it’s customer’s responsibility to keep a backup of any licenses on the system board.

Thanks